How to Crack CGMiner 3.7.2 and Mine Litecoin with GPU
CGMiner 3.7.2 is a popular mining software for Litecoin (LTC) and other Scrypt-based cryptocurrencies. It supports both AMD and Nvidia GPUs, as well as ASIC miners. However, the official version of CGMiner 3.7.2 requires a license key to run, which can be expensive and hard to obtain.
Fortunately, there is a way to crack CGMiner 3.7.2 and use it without a license key. This will allow you to mine Litecoin and other Scrypt coins with your GPU for free. In this article, we will show you how to do it step by step.
CRACK CGMiner 3.7.2 - GPU Mining Software (Litecoin Scrypt)
Step 1: Download CGMiner 3.7.2
The first step is to download CGMiner 3.7.2 from a reliable source. You can use the link below to get the latest version of CGMiner 3.7.2 with GPU support for Windows:
Download CGMiner 3.7.2
Make sure to check the SHA256 checksum of the downloaded file to verify its integrity. The checksum should be:
If the checksum matches, you can proceed to the next step.
Step 2: Extract CGMiner 3.7.2
The next step is to extract CGMiner 3.7.2 from the downloaded archive. You will need a software that can handle RAR files, such as WinRAR or 7-Zip.
Extract the archive to a folder of your choice, such as C:\\CGMiner\\. Inside the folder, you will find a file called README.txt with installation instructions.
Open the README.txt file and follow the instructions carefully. You will need to edit some files to configure CGMiner for your mining pool and wallet address.
Step 3: Crack CGMiner 3.7.2
The final step is to crack CGMiner 3.7.2 and bypass the license key requirement.
To do this, you will need a hex editor, such as HxD or Hex Workshop.
Open the cgminer.exe file with your hex editor and search for the following hex string:
68 00 A0 E1 A8
This string corresponds to the instruction that checks for the license key.
Replace this string with:
68 00 A0 E1 A9
This string corresponds to the instruction that skips the license key check.
Save the cgminer.exe file and close your hex editor.
Step 4: Run CGMiner 3.7.2
You are now ready to run CGMiner 3.7.2 and start mining Litecoin with your GPU.
To run CGMiner 3.7.2, open a command prompt window and navigate to the folder where you extracted CGMiner.
Type the following command:
This will launch CGMiner with the default settings for Scrypt mining.
You can also add other parameters to customize your mining experience, such as intensity, worksize, threads, etc.
For a full list of parameters supported by CGMiner, you can refer to this guide:
CGMiner Setup Guide
In this article, we showed you how to crack CGMiner 3.7.2 and mine Litecoin with GPU without a license key.
This method is simple and effective, but it 29c81ba772